Cold Storage Lighting

cold storage lighting

cold storage lighting

Phone: +86 13681157706

Email: hushijie8686@gmail.com

Contact: Jesse Hu — Sales Director

LED Lighting for Cold Storage Warehouses

Designed for large-scale cold storage facilities, refrigerated distribution centers, and industrial freezer warehouses. These vapor-proof LED fixtures provide reliable illumination in environments with constant low temperatures, moisture, and frequent wash-downs.

Key Features

Consistent Cold-Room Performance

Rated to operate without flicker or delay at temperatures down to -40°C. LED drivers and lenses are selected to handle repeated defrost cycles and deep-freeze conditions.

Sealed Against Moisture and Dust

IP65 or IP66 enclosure keeps water jets, humidity, and airborne particles away from internal electronics. Gasketed joints and sealed cable entries maintain the protective integrity required for wash-down areas.

Corrosion-Resistant Materials

Polycarbonate lens and stainless steel or coated aluminum housing resist rust, impact, and chemical exposure from common cleaning agents used in food and pharmaceutical cold storage.

Clear, Even Light Distribution

Wide beam optics and linear form factors help reduce dark spots across high shelving and narrow aisles. Fixtures can be linked to cover long ceiling runs typical in warehouse layouts.

Installation and Mounting

Surface-mounted directly onto insulated panels with stainless steel brackets. Lightweight construction and simple wiring connections allow rapid installation in active storage areas with minimum downtime.

Technical Summary

  • Voltage: 100-277V AC or 12V/24V DC versions
  • Protection: IP65 or IP66
  • Temperature range: -40°C to +5°C
  • Construction: Polycarbonate lens, aluminum or stainless steel body
  • Form factor: Linear and strip options available

Common Applications

  • Cold storage distribution centers and 3PL warehouses
  • Food processing and meat-packing cold rooms
  • Pharmaceutical and vaccine storage facilities
  • Refrigerated docks and staging areas

Inquiries

Contact our team for fixture selection support, lighting layout advice, or to request a specification sheet.

Hiroshi Takeda

Hiroshi Takeda

Refrigeration Contractor

“I often recommend their evaporator fans and condensing units to my clients. The product range covers most standard walk-in sizes. Whenever I need a spec sheet or wiring diagram, I get a reply within

David Chen

David Chen

Project Manager

We’ve sourced cold room panels from them for three projects now. Panel thickness and cutouts were done exactly to our drawings. Delivery was on schedule, and the locking system went together without g

Maria Costa

Maria Costa

Project Manager

Our walk-in cooler went down on a Friday, and their team helped us get a replacement condensing unit quickly. It’s been running for over a year without any problems. They didn’t oversell me — they jus

Anders Nilsson

Anders Nilsson

Facility Manager

We replaced 12 evaporator fans in our freezer warehouse with their EC motor models. The installation went smoothly, and the noise level dropped enough that our staff noticed the difference. When I cal

Surface-mounting with stainless steel clips or brackets is the typical method. Fixtures are placed on walls or ceilings, with cables routed through sealed grommets or conduit entries to preserve the vapor seal of the insulated panel. Replacement is done by detaching the fixture from its mounting, without needing to open the sealed housing.

Common voltage inputs include 100-277V AC for direct mains connection, as well as 12V or 24V DC options for low-voltage installations. Strip lights and linear fixtures are available in standard lengths and can be connected in series to fit room dimensions. Dimmable and sensor-integrated versions can be requested.

Yes, LED drivers and housings designed for cold storage are tested to start and run at temperatures as low as -40°C. Materials such as polycarbonate lenses and stainless steel brackets avoid brittleness and corrosion issues that can affect standard fixtures in freezing conditions.

Fixtures with IP65 or IP66 ratings are commonly used. These ratings indicate protection against dust ingress and resistance to water jets, making them suitable for wash-down areas and rooms where defrost cycles create wet conditions. Wiring connections also need water-tight seals.

LED fixtures are widely chosen for cold storage environments. They produce less radiated heat compared to traditional fluorescent or incandescent lamps and reach full brightness immediately at low temperatures. Vapor-proof enclosures protect internal components from moisture, ice, and condensation.

Ready to Discuss Your Project?

Send us your requirements today and receive fast support, details on LED cold room light, cold storage light, freezer room lighting and factory pricing within 24 hours.

Call Us

+86 13681157706

Mon-Fri, 8am-6pm CST

Email Us

hushijie8686@gmail.com

We reply within 24 hours

WhatsApp

+86 13681157706

Instant messaging available

Our Address

113 Kaiyuan Road, Huairou District, Beijing


Code
Chat with us!