hushijie8686@gmail.com
+86 13681157706
Beijing, China
Phone: +86 13681157706
Email: hushijie8686@gmail.com
Contact: Jesse Hu — Sales Director
This liquid receiver holds high-pressure refrigerant after the condenser, helping maintain a stable liquid supply to the expansion valve under varying loads. It is built from pressure-rated steel and is compatible with common refrigerants used in cold storage.
By storing surplus refrigerant, the receiver compensates for charge variations and helps avoid flash gas in the liquid line during peak demand.
The carbon steel shell is welded and tested to meet pressure requirements for R404A, R448A, and similar refrigerants. Threaded or flanged connections are available.
Mounting feet or saddles allow horizontal or vertical placement. Inlet and outlet ports are positioned for straightforward integration into condensing unit and multi-compressor rack layouts.
A charging port and, where required, a liquid-level sight glass or pressure relief connection can be factory-fitted.
Contact our team with system charge and connection size requirements to receive a matching receiver specification.
“I often recommend their evaporator fans and condensing units to my clients. The product range covers most standard walk-in sizes. Whenever I need a spec sheet or wiring diagram, I get a reply within
We’ve sourced cold room panels from them for three projects now. Panel thickness and cutouts were done exactly to our drawings. Delivery was on schedule, and the locking system went together without g
Our walk-in cooler went down on a Friday, and their team helped us get a replacement condensing unit quickly. It’s been running for over a year without any problems. They didn’t oversell me — they jus
We replaced 12 evaporator fans in our freezer warehouse with their EC motor models. The installation went smoothly, and the noise level dropped enough that our staff noticed the difference. When I cal
Surface-mounting with stainless steel clips or brackets is the typical method. Fixtures are placed on walls or ceilings, with cables routed through sealed grommets or conduit entries to preserve the vapor seal of the insulated panel. Replacement is done by detaching the fixture from its mounting, without needing to open the sealed housing.
Common voltage inputs include 100-277V AC for direct mains connection, as well as 12V or 24V DC options for low-voltage installations. Strip lights and linear fixtures are available in standard lengths and can be connected in series to fit room dimensions. Dimmable and sensor-integrated versions can be requested.
Yes, LED drivers and housings designed for cold storage are tested to start and run at temperatures as low as -40°C. Materials such as polycarbonate lenses and stainless steel brackets avoid brittleness and corrosion issues that can affect standard fixtures in freezing conditions.
Fixtures with IP65 or IP66 ratings are commonly used. These ratings indicate protection against dust ingress and resistance to water jets, making them suitable for wash-down areas and rooms where defrost cycles create wet conditions. Wiring connections also need water-tight seals.
LED fixtures are widely chosen for cold storage environments. They produce less radiated heat compared to traditional fluorescent or incandescent lamps and reach full brightness immediately at low temperatures. Vapor-proof enclosures protect internal components from moisture, ice, and condensation.
Send us your requirements today and receive fast support, details on LED cold room light, cold storage light, freezer room lighting and factory pricing within 24 hours.
+86 13681157706
Mon-Fri, 8am-6pm CST
hushijie8686@gmail.com
We reply within 24 hours
+86 13681157706
Instant messaging available
113 Kaiyuan Road, Huairou District, Beijing
