refrigerant receiver-Beijing Forward Good Technology Development Co.,Ltd.

refrigerant receiver

Phone: +86 13681157706

Email: hushijie8686@gmail.com

Contact: Jesse Hu — Sales Director

Refrigerant Receiver – Vertical and Horizontal Options

This refrigerant receiver stores liquid downstream of the condenser, helping the system adjust to temperature and load changes. It is offered in vertical and horizontal configurations to suit different piping layouts and machine room dimensions.

Key Features

Load-Adaptive Storage

The receiver volume is matched to condenser capacity and system charge, providing a buffer against seasonal charge migration and fluctuating thermal loads.

Corrosion-Resistant Exterior

A factory-applied coating protects the steel vessel from moisture and mild cleaning agents common in cold storage plant rooms.

Clear Sizing Guidance

Connection sizes, diameter, and overall length are listed in product documentation to simplify selection for new builds and replacements.

Compatibility

Designed for R404A, R448A, R449A, R290, and other widely adopted cold storage refrigerants, subject to regional codes.

Typical Applications

Outdoor and indoor condensing units
Cold storage plant rooms
Refrigerated container systems

Inquiries

Provide your refrigerant type and required storage capacity, and we will suggest a suitable receiver model.

Hiroshi Takeda

Refrigeration Contractor

“I often recommend their evaporator fans and condensing units to my clients. The product range covers most standard walk-in sizes. Whenever I need a spec sheet or wiring diagram, I get a reply within

David Chen

Project Manager

We’ve sourced cold room panels from them for three projects now. Panel thickness and cutouts were done exactly to our drawings. Delivery was on schedule, and the locking system went together without g

Maria Costa

Project Manager

Our walk-in cooler went down on a Friday, and their team helped us get a replacement condensing unit quickly. It’s been running for over a year without any problems. They didn’t oversell me — they jus

Anders Nilsson

Facility Manager

We replaced 12 evaporator fans in our freezer warehouse with their EC motor models. The installation went smoothly, and the noise level dropped enough that our staff noticed the difference. When I cal

Surface-mounting with stainless steel clips or brackets is the typical method. Fixtures are placed on walls or ceilings, with cables routed through sealed grommets or conduit entries to preserve the vapor seal of the insulated panel. Replacement is done by detaching the fixture from its mounting, without needing to open the sealed housing.

Common voltage inputs include 100-277V AC for direct mains connection, as well as 12V or 24V DC options for low-voltage installations. Strip lights and linear fixtures are available in standard lengths and can be connected in series to fit room dimensions. Dimmable and sensor-integrated versions can be requested.

Yes, LED drivers and housings designed for cold storage are tested to start and run at temperatures as low as -40°C. Materials such as polycarbonate lenses and stainless steel brackets avoid brittleness and corrosion issues that can affect standard fixtures in freezing conditions.

Fixtures with IP65 or IP66 ratings are commonly used. These ratings indicate protection against dust ingress and resistance to water jets, making them suitable for wash-down areas and rooms where defrost cycles create wet conditions. Wiring connections also need water-tight seals.

LED fixtures are widely chosen for cold storage environments. They produce less radiated heat compared to traditional fluorescent or incandescent lamps and reach full brightness immediately at low temperatures. Vapor-proof enclosures protect internal components from moisture, ice, and condensation.

Liquid Receiver