horizontal liquid receiver-Beijing Forward Good Technology Development Co.,Ltd.

horizontal liquid receiver

Phone: +86 13681157706

Email: hushijie8686@gmail.com

Contact: Jesse Hu — Sales Director

Horizontal Liquid Receiver for Height-Restricted Installations

This horizontal liquid receiver is designed where vertical clearance is limited, such as rooftop condensing units and compact cold room machine compartments. The low-profile cylinder sits on mounting saddles for secure floor or platform installation.

Key Features

Low-Profile Tank

The horizontal orientation reduces overall height, making it easier to fit into pre-existing frames and under low ceilings.

Bottom Outlet for Liquid Feed

A bottom-positioned outlet ensures a reliable liquid seal and steady delivery to the expansion device, even with partial fill levels.

Pressure-Tested Steel Shell

Welded construction with the same pressure ratings as standard vertical receivers, suitable for typical cold storage condensing pressures.

Accessories and Ports

Supplied with mounting saddles. Optional sight glass and pressure relief valve connections can be added on request.

Typical Applications

Rooftop cold room condensing units
Under-bench or mezzanine machine rooms
Refrigeration packs with height constraints

Inquiries

Hiroshi Takeda

Refrigeration Contractor

“I often recommend their evaporator fans and condensing units to my clients. The product range covers most standard walk-in sizes. Whenever I need a spec sheet or wiring diagram, I get a reply within

David Chen

Project Manager

We’ve sourced cold room panels from them for three projects now. Panel thickness and cutouts were done exactly to our drawings. Delivery was on schedule, and the locking system went together without g

Maria Costa

Project Manager

Our walk-in cooler went down on a Friday, and their team helped us get a replacement condensing unit quickly. It’s been running for over a year without any problems. They didn’t oversell me — they jus

Anders Nilsson

Facility Manager

We replaced 12 evaporator fans in our freezer warehouse with their EC motor models. The installation went smoothly, and the noise level dropped enough that our staff noticed the difference. When I cal

Surface-mounting with stainless steel clips or brackets is the typical method. Fixtures are placed on walls or ceilings, with cables routed through sealed grommets or conduit entries to preserve the vapor seal of the insulated panel. Replacement is done by detaching the fixture from its mounting, without needing to open the sealed housing.

Common voltage inputs include 100-277V AC for direct mains connection, as well as 12V or 24V DC options for low-voltage installations. Strip lights and linear fixtures are available in standard lengths and can be connected in series to fit room dimensions. Dimmable and sensor-integrated versions can be requested.

Yes, LED drivers and housings designed for cold storage are tested to start and run at temperatures as low as -40°C. Materials such as polycarbonate lenses and stainless steel brackets avoid brittleness and corrosion issues that can affect standard fixtures in freezing conditions.

Fixtures with IP65 or IP66 ratings are commonly used. These ratings indicate protection against dust ingress and resistance to water jets, making them suitable for wash-down areas and rooms where defrost cycles create wet conditions. Wiring connections also need water-tight seals.

LED fixtures are widely chosen for cold storage environments. They produce less radiated heat compared to traditional fluorescent or incandescent lamps and reach full brightness immediately at low temperatures. Vapor-proof enclosures protect internal components from moisture, ice, and condensation.

Liquid Receiver