Condensing Unit

condensing unit

condensing unit

Phone: +86 13681157706

Email: hushijie8686@gmail.com

Contact: Jesse Hu — Sales Director

Refrigeration Units for Cold Storage

We provide condensing units configured for walk-in coolers, freezers, and industrial cold rooms. Units are assembled to match required cooling capacity, temperature range, and installation conditions.

Compressor Types

Hermetic Reciprocating Compressors

Common for small to medium capacity applications. The compressor and motor are enclosed in a sealed housing, requiring limited on-site service attention.

Semi-Hermetic Reciprocating Compressors

Suitable for medium to large cold rooms. Internal components are accessible for maintenance, which supports longer operational life in demanding conditions.

Scroll Compressors

Available primarily for medium-temperature use. Operation is smooth with reduced vibration levels compared to reciprocating types.

Condenser and Fan Section

Air-cooled condensers are fitted with corrosion-resistant coil coatings. Fan motors are selected for continuous operation, and low-noise options can be included for noise-sensitive environments.

Temperature Configurations

Units are offered in medium-temperature and low-temperature versions. The appropriate range is selected based on the target room temperature and product storage needs.

Refrigerant Choices

Units can be prepared for widely used refrigerants such as R404A, R448A, R449A, and R290. The final refrigerant depends on regional codes and system design.

Housing and Installation

Outdoor units feature weather-resistant enclosures with integrated mounting rails. Indoor models are built with compact frames for technical rooms or mezzanines.

Common Applications

  • Walk-in coolers and freezers in food retail and service
  • Perishable goods cold storage warehouses
  • Blast chillers and shock freezers in food production
  • Pharmaceutical and laboratory cold rooms

Selection and Support

Contact our team with your required cooling capacity, desired temperature, and site details. We provide unit sizing assistance and technical documentation to help confirm compatibility with your cold room design.

Hiroshi Takeda

Hiroshi Takeda

Refrigeration Contractor

“I often recommend their evaporator fans and condensing units to my clients. The product range covers most standard walk-in sizes. Whenever I need a spec sheet or wiring diagram, I get a reply within

David Chen

David Chen

Project Manager

We’ve sourced cold room panels from them for three projects now. Panel thickness and cutouts were done exactly to our drawings. Delivery was on schedule, and the locking system went together without g

Maria Costa

Maria Costa

Project Manager

Our walk-in cooler went down on a Friday, and their team helped us get a replacement condensing unit quickly. It’s been running for over a year without any problems. They didn’t oversell me — they jus

Anders Nilsson

Anders Nilsson

Facility Manager

We replaced 12 evaporator fans in our freezer warehouse with their EC motor models. The installation went smoothly, and the noise level dropped enough that our staff noticed the difference. When I cal

Surface-mounting with stainless steel clips or brackets is the typical method. Fixtures are placed on walls or ceilings, with cables routed through sealed grommets or conduit entries to preserve the vapor seal of the insulated panel. Replacement is done by detaching the fixture from its mounting, without needing to open the sealed housing.

Common voltage inputs include 100-277V AC for direct mains connection, as well as 12V or 24V DC options for low-voltage installations. Strip lights and linear fixtures are available in standard lengths and can be connected in series to fit room dimensions. Dimmable and sensor-integrated versions can be requested.

Yes, LED drivers and housings designed for cold storage are tested to start and run at temperatures as low as -40°C. Materials such as polycarbonate lenses and stainless steel brackets avoid brittleness and corrosion issues that can affect standard fixtures in freezing conditions.

Fixtures with IP65 or IP66 ratings are commonly used. These ratings indicate protection against dust ingress and resistance to water jets, making them suitable for wash-down areas and rooms where defrost cycles create wet conditions. Wiring connections also need water-tight seals.

LED fixtures are widely chosen for cold storage environments. They produce less radiated heat compared to traditional fluorescent or incandescent lamps and reach full brightness immediately at low temperatures. Vapor-proof enclosures protect internal components from moisture, ice, and condensation.

Ready to Discuss Your Project?

Send us your requirements today and receive fast support, details on LED cold room light, cold storage light, freezer room lighting and factory pricing within 24 hours.

Call Us

+86 13681157706

Mon-Fri, 8am-6pm CST

Email Us

hushijie8686@gmail.com

We reply within 24 hours

WhatsApp

+86 13681157706

Instant messaging available

Our Address

113 Kaiyuan Road, Huairou District, Beijing


Code
Chat with us!